Great service from WS & Sons Roofing Contractors. They fixed our leaking valley, replaced rotten battens, and re-cemented the ridge tiles. Good communication, fair price, and quality work.

Flat roof replacement in Brighton: torch-on felt, EPDM rubber and GRP
- Competitive, fair pricing
- Written quotations
- No obligation
- Free roof inspections
Get a free quote
Tell us what the roof is doing. William comes out and gives you a free written quote.
Flat roof replacement in Brighton for extensions, garages, dormers and bays, in torch-on felt, EPDM rubber or GRP fibreglass, with a 25-year guarantee. Ring 01273 110909 or send the form for a free quote.
A flat roof fails from the deck up. Old chipboard swells once water gets under the felt, the surface goes soft and spongy, and every patch on top just moves the leak along. That is why we replace a failed flat roof from the joists, not from the top layer.
We strip the old covering and the deck, check the joists and replace any that have rotted, then lay a new OSB deck before the covering goes on. You choose the system: torch-on felt in two or three layers with a mineral cap sheet, a single sheet of EPDM rubber, or GRP fibreglass laid in place with a resin topcoat. Upstands are dressed up the wall, new trims go round the edge and rooflights are sealed into the deck, not bolted on afterwards.
Leslie's felt roof in September 2026 was finished in about five hours. Mei-Lee's had a new window built into it. Kyrah's had all new timber and torch-on felt. The photos on this page are those jobs and others like them.
Looking for the Brighton picture, street by street, with permits and prices? Read our page on flat roofing in Brighton.
What is included
- Old covering and deck stripped
- Joists checked, rotten timber replaced
- New OSB deck
- Torch-on felt, EPDM rubber or GRP fibreglass
- Upstands dressed and sealed to walls
- New edge trims, drip trims and outlets
- Rooflights and roof windows built in
- 25-year guarantee, in writing
Signs you need this
- Water pooling on the roof for days after rain
- Blisters, splits or cracks in the felt
- A soft or spongy feel underfoot
- Damp on the ceiling of the extension or garage
- Moss and plants growing on the roof
Flat roofing: our recent work
Every photo is one of our own jobs. Tap to enlarge.
Flat roof stripped back to the joists before a new deck
New OSB deck boards laid on a flat roof
New torch-on felt flat roof seen from the scaffold
New felt flat roof on an angled single-storey rear extension
New flat roof built with a roof window over the room below
Grey flat roof over a bay window with a dressed edge
How it works
Free survey
William checks the covering, the deck and the edges and talks you through felt, EPDM and GRP.
Strip and check
Old roof off, joists checked, new deck laid.
New covering
Felt, rubber or GRP laid, upstands sealed, trims and rooflights fitted.
Cleared and guaranteed
Site cleared, waste taken away, 25-year guarantee handed over.
Every new flat roof we lay comes with our 25-year guarantee.
Laying a flat roof from the deck upwards
Check the fall
We establish the drainage direction and outlet position before removing the covering. Low spots need a planned correction in the supporting roof build-up.
Open and inspect
The old layers are stripped to reveal the deck and joists. Wet or soft material is removed before the new covering conceals it.
Prepare the roof build-up
Deck joints receive proper support and the insulation arrangement is agreed. Wall upstands and rooflight kerbs are set before waterproofing starts.
Apply the chosen system
Felt layers, bonded EPDM or GRP reinforcement are installed with their matching accessories. Each system needs suitable surface preparation and weather conditions.
Finish outlets and edges
We form drips, wall terminations and drainage outlets as connected details. The completed roof is checked for obstructions and vulnerable junctions before handover.
Allowing for preparation and curing
A simple rectangular roof has fewer details than an extension with rooflights, pipes and several wall junctions. Stripping reveals whether the deck alone needs changing or the joists also need work. Adhesives, resins and coatings have application and curing conditions that shape the programme. We plan a suitable weather window and explain the stages before opening the roof. Keeping the household's access clear and protecting the room below are part of that sequence.
Comparing felt, rubber and fibreglass
Torch-on felt forms a layered covering with reinforced membranes and a finished cap sheet. EPDM uses a flexible rubber membrane, fully bonded on a suitable deck, with formed details at corners and penetrations. Large sheet sizes reduce field joints on straightforward shapes, but the edge details still need careful work. The choice depends on access, the roof geometry and the surrounding construction. Where heat is unsuitable, the installation method needs to be chosen around that constraint from the outset.
GRP uses reinforcement saturated with resin and finished with a protective topcoat. Its deck must be dry, stable and prepared for the specified system, including movement details where required. A hard surface does not make every GRP roof suitable as a terrace. Regular foot traffic requires a roof designed for that use. Insulation, condensation control and finished threshold levels also affect the decision. Compare the systems in our flat roof materials guide before choosing the finish for your extension.
What changes the flat roof quote
The visible covering is only part of a flat roof replacement. The quote should show the deck, drainage and junction details too.
- Roof shape, area and number of edges
- Condition of joists and existing deck
- Insulation arrangement and finished levels
- Rooflights, pipes and wall upstands
- Felt, EPDM or GRP specification
- Drainage alterations and safe working access
Our flat roof cost guide sets out the main price considerations. Inspection confirms which layers your roof needs.
Protecting the finished flat roof
Keep outlets free of leaves and watch for a change in how the roof drains. Do not place planters, ladders or stored materials on the covering without checking its design. Trades working on nearby windows or aerials need to protect the surface against sharp tools and dropped fixings. Report a lifting trim or damaged patch before water reaches the deck. Retain the system details so future repairs use materials compatible with the original installation.
Flat roofing: your questions answered
Felt, EPDM or GRP: which is best?
Torch-on felt is the most familiar and suits most extensions and garages. EPDM rubber is one single sheet with no joints, good on simple shapes. GRP gives a hard, walkable finish and handles awkward details well. We recommend the one that suits your roof, not the one with the biggest margin. Our flat roof types guide explains the differences.
How long does a new flat roof take?
A garage or small extension is done in a day. Leslie's felt roof in September 2026 took about five hours. Larger roofs or ones needing new joists take two to three days.
Can you add a rooflight?
Yes. Rooflights and roof windows are built into the new deck with proper upstands, which is the only way they stay watertight.
Do you replace the boards underneath?
Yes, every time we replace a covering. Laying new felt over a wet or soft deck is how flat roofs fail early.
Can you repair my flat roof instead?
Small splits and failed upstands can be repaired. If the deck is soft, a repair only moves the leak, and we will show you why.
Should a flat roof be completely level?
A flat roof needs a drainage fall towards a suitable outlet or gutter. We assess the supporting structure and finished levels before recovering it. Laying another membrane over a low spot does not correct the drainage arrangement.
Can I use my extension roof as a balcony?
A roof covering alone does not provide a balcony. Structure, guarding, access and a suitable wearing surface all need separate consideration. Tell us about any intended use before the roof specification is agreed so it can be assessed properly.
Flat roofing by area
Related services
What customers say on Google
Thanks to William and his team we now have a completely new flat felt roof, with a 15 year guarentee. No mess was left, and they were very quick getting the job done in about 5 hours!
Ws & sons done a fantastic job on replacing my guttering & soffits they also replaced my old cement verge to a dry verge system it looks fantastic all done in 2 days left my property like new very clean & tidy
William came around same day to take a look at my leak on my flat roof… and the team were in place in a couple days. Really happy with the work, as well as the clean up
Thanks to WS & sons roofing contractors for replacing our old flat roof. He supplied all new timber, all new torch on felt, put on a new dry ridge kit system and also replace some tiles. He’s done a fantastic job! Highly recommend and will use again.
Thank you to ws&sons roofing contractors Ltd for doing such a great job on replacing my roof William landed on time done a great job price was great never delayed time Highly recommend.
Thank you to William and his team from ws & sons roofing Contractors the team done a fantastic job on replacing all new ridges and installed a new dry ridge system. He also cleaned the moss off. The tiles cleaned out all of the guttering and removed all the green mould. Job was done. All in two days. Fair price and I highly recommend. I will be definitely using them again thanks guys
Prompt flat roof build with a window installation. Looks great, very neat and tidy. Polite and considerate guys. Hasn't rained yet but am sure it will hold up well. Thank you and recommend to future clients.
Thank you Ws & sons roofing excellent service, we had a leak in the loft and the guys were there following day to replace felt and few tiles, all good now many thanks! would highly recommend
roof
guarantee
Every re-roof and flat roof guaranteed for 25 years, in writing
When we re-roof your house or lay a new flat roof, our workmanship is guaranteed for 25 years from the day we finish, and the membrane, tiles, slates and flat roof systems carry their manufacturers' guarantees on top. All our work is guaranteed, and we are fully insured, with £1 million public liability cover.
Covered
- Our workmanship on re-roofs and flat roofs for 25 years
- Lead, flashings, ridges and verges we fit
- Flat roofs laid to the system's specification
- Repairs, with the terms on your quote
On top
- Tile and slate manufacturer guarantees
- Membrane and flat roof system guarantees
- Photos of the finished job
- William on the end of the phone if anything is wrong
Not covered
- Storm or accidental damage after completion
- Work altered or added by someone else
- Parts of the roof we did not work on
- Gutters left to block and overflow
The guarantee for your job is written on your quote before you agree to anything. Read the full guarantee.
Talk to us about flat roofing
Ring or send the form. William comes out, looks at the roof, shows you what is needed and gives you a free written quote, with no obligation.



