20 years' experience · Roofers in Brighton, Hove and Sussex Call 01273 1109094.9 on Google from 43 reviews
Rendered chimney stack with new lead flashing, roof ladder in place
Chimneys and leadwork

Chimney repairs in Brighton, repointing and new lead flashing

  • Competitive, fair pricing
  • Written quotations
  • No obligation
  • Free roof inspections

Get a free quote

Tell us what the roof is doing. William comes out and gives you a free written quote.

Step 1 of 2
Expert Roofer Verified member badge, view our verified profile 4.9★ from 43 Google reviews 25-year guarantee · Fully insured

Free written quote, no obligation Or ring 01273 110909

Chimney repairs in Brighton: repointing, new flaunching, lead flashings and chimney removals, plus leadwork across the whole roof. Ring 01273 110909 or send the form for a free quote from William.

A chimney stands proud of the roof and takes the full force of the wind and rain off the sea. Mortar joints wash out, the sloping mortar cap at the top, called the flaunching, cracks, and the lead where the stack meets the tiles lifts away. Water then runs down inside the brickwork and shows up as a stain on the chimney breast.

We repoint stacks, rebuild flaunching, fit new pots and cowls and renew the lead: step flashings up the sides, an apron at the front and a back gutter behind. Ganga's review from August 2026 sums up a typical visit: chimney repointed and broken tiles replaced on the same trip.

Chimneys that are no longer used can come down to below the roof line, with the gap tiled in to match, which removes the maintenance for good. Leadwork elsewhere, on valleys, dormers and abutments, is covered too, so roof and chimney repairs are done on one visit with one set of access.

When you call, you speak to WilliamWS & Sons is family-run. William answers the phone, comes out to quote and works on the roof with his team.

What is included

  • Repointing of chimney stacks
  • New flaunching at the top of the stack
  • Pots, cowls and caps fitted
  • Lead step flashings, aprons and back gutters
  • Chimney removal below the roof line
  • Lead valleys and abutments
  • Access by roof ladder, tower or scaffold as the job needs

Signs you need this

  • A damp patch on the chimney breast or ceiling beside it
  • Crumbling mortar between the bricks
  • Cracked flaunching or loose pots
  • Lead lifting away from the brickwork
  • Bits of mortar on the roof or in the gutter

Chimney repairs and leadwork: our recent work

Every photo is one of our own jobs. Tap to enlarge.

How it works

Free survey

William checks the stack, the lead and the loft below it.

Quote

What needs doing, the access needed and the price.

Repair

Repointing, flaunching and lead done to last.

Cleared up

Debris cleared from the roof and the gutters.

Chimney leaks are slow and hidden. Fixing the lead and the flaunching together stops them properly.

Working through a chimney's weathering details

  1. Separate masonry from roof faults

    We inspect the stack faces, top and roof junction independently. Water at a chimney breast can arrive through more than one defective detail.

  2. Prepare sound joints

    Loose mortar is removed without damaging the brick edges. The depth and condition of the joints determine the preparation before repointing.

  3. Repair the stack head

    Pots and the surrounding flaunching are checked for stability. The top is formed to shed rain away from the pot bases and masonry.

  4. Renew the lead junctions

    Aprons, soakers, step flashings and back gutters are assessed as a connected assembly. Lead thickness and section lengths suit the specific detail.

  5. Finish and check drainage

    Chased flashings are secured and the back gutter is cleared. We inspect the adjoining tiles or slates before the access equipment is removed.

Masonry, leadwork and drying conditions

A short flashing repair involves a different programme from repointing an entire exposed stack. Safe access must reach every face being worked on, including the side hidden from the garden. Mortar work needs conditions that allow it to set without drying too quickly or being washed out. Lead details take fitting time around irregular brickwork. We explain the order of work, including protection for fresh masonry and any separate arrangements concerning a working flue.

Choosing mortar and lead details

Mortar needs to suit the existing masonry. A very hard repair against softer old bricks can concentrate weathering at the brick edges. Repointing also needs a sound joint behind the finished face; smearing a thin coat over loose material does not rebuild it. Where the stack head is defective, flaunching is shaped around stable pots to shed water. Pots, caps and cowls have different purposes, so the condition and use of each flue must be identified before a fitting is chosen.

Code 4 and code 5 lead are used for different roofing details, with the choice governed by the application, size and support. Flashings need suitable laps and room for thermal movement. Long unsupported sheets and rigidly trapped ends encourage splits. A new visible step flashing alone will not fix defective soakers concealed beneath it. Our roof repair service covers the adjoining covering where needed, so the quote can show the masonry work and the roof junction as separate, understandable items.

The scope behind a chimney quote

A stack is priced by its condition and access, not just its height above the tiles. We identify which faces and lead details need work.

  • Stack height and scaffold arrangement
  • Number of faces needing repointing
  • Condition of bricks, pots and flaunching
  • Length and type of lead flashings
  • Back gutter access and supporting boards
  • Roof covering disturbed around the stack

The roof repair cost guide includes the main access considerations. Your chimney specification records the individual details being renewed.

Keeping chimney drainage open

Check from below for fresh mortar fragments, moved pots or a flashing edge lifting from the brickwork. Leaves collecting behind the stack obstruct the back gutter even after good leadwork has been fitted. Arrange safe clearing when needed. Keep photographs of the completed joints and lead details with the quote. Tell a chimney specialist about roofing work before changes to a working flue, and keep ventilation to any disused flue under review with the appropriate trade.

Chimney repairs and leadwork: your questions answered

Why is my chimney breast damp?

Rain getting in at the flashing, the flaunching or the brickwork is the usual cause. Condensation from an unused, capped flue is the other. We check both.

Do you need scaffolding for a chimney?

Short stacks on a bungalow or semi are reached with roof ladders. Tall stacks on terraces need a chimney scaffold for safety, which goes on the quote.

Can you take my chimney down?

Yes. We remove it below the roof line and tile over the gap to match. The breast inside is a separate building job.

Do you do leadwork elsewhere on the roof?

Yes. Valleys, abutments, dormer cheeks and bay roofs.

Is chimney repointing the same as replacing flaunching?

No. Repointing renews mortar between the bricks on the stack faces. Flaunching is the weathering surface around the pots at the top. Either can fail independently, so the inspection and quote identify both details separately.

Can lead be fixed tightly at both ends?

Lead needs to expand and contract as its temperature changes. Its lengths, laps and fixings must allow that movement. Trapping a sheet rigidly can cause fatigue and splits even when the exposed surface initially looks neat.

Related services

Reviews

What customers say on Google

Peter T.Leaking valley, rotten battens, ridge re-cemented · September 2026

Great service from WS & Sons Roofing Contractors. They fixed our leaking valley, replaced rotten battens, and re-cemented the ridge tiles. Good communication, fair price, and quality work.

Leslie C.New felt flat roof · September 2026

Thanks to William and his team we now have a completely new flat felt roof, with a 15 year guarentee. No mess was left, and they were very quick getting the job done in about 5 hours!

Antonioxpc N.Guttering, soffits and dry verge · September 2026

Ws & sons done a fantastic job on replacing my guttering & soffits they also replaced my old cement verge to a dry verge system it looks fantastic all done in 2 days left my property like new very clean & tidy

Andreas J.Flat roof leak · September 2026

William came around same day to take a look at my leak on my flat roof… and the team were in place in a couple days. Really happy with the work, as well as the clean up

Kyrah S.Flat roof, dry ridge and tiles · August 2026

Thanks to WS & sons roofing contractors for replacing our old flat roof. He supplied all new timber, all new torch on felt, put on a new dry ridge kit system and also replace some tiles. He’s done a fantastic job! Highly recommend and will use again.

Danar A.Roof replacement · October 2026

Thank you to ws&sons roofing contractors Ltd for doing such a great job on replacing my roof William landed on time done a great job price was great never delayed time Highly recommend.

DarceyNew dry ridge, moss and gutters cleaned · August 2026

Thank you to William and his team from ws & sons roofing Contractors the team done a fantastic job on replacing all new ridges and installed a new dry ridge system. He also cleaned the moss off. The tiles cleaned out all of the guttering and removed all the green mould. Job was done. All in two days. Fair price and I highly recommend. I will be definitely using them again thanks guys

Mei-Lee J.Flat roof with a window · September 2026

Prompt flat roof build with a window installation. Looks great, very neat and tidy. Polite and considerate guys. Hasn't rained yet but am sure it will hold up well. Thank you and recommend to future clients.

Harry S.Loft leak, felt and tiles · September 2026

Thank you Ws & sons roofing excellent service, we had a leak in the loft and the guys were there following day to replace felt and few tiles, all good now many thanks! would highly recommend

25-year
roof
guarantee
Our guarantee

Every re-roof and flat roof guaranteed for 25 years, in writing

When we re-roof your house or lay a new flat roof, our workmanship is guaranteed for 25 years from the day we finish, and the membrane, tiles, slates and flat roof systems carry their manufacturers' guarantees on top. All our work is guaranteed, and we are fully insured, with £1 million public liability cover.

Covered

  • Our workmanship on re-roofs and flat roofs for 25 years
  • Lead, flashings, ridges and verges we fit
  • Flat roofs laid to the system's specification
  • Repairs, with the terms on your quote

On top

  • Tile and slate manufacturer guarantees
  • Membrane and flat roof system guarantees
  • Photos of the finished job
  • William on the end of the phone if anything is wrong

Not covered

  • Storm or accidental damage after completion
  • Work altered or added by someone else
  • Parts of the roof we did not work on
  • Gutters left to block and overflow

The guarantee for your job is written on your quote before you agree to anything. Read the full guarantee.

Talk to us about chimney repairs and leadwork

Ring or send the form. William comes out, looks at the roof, shows you what is needed and gives you a free written quote, with no obligation.

Free written roofing quoteSpeak to William on 01273 110909
Get my quote